Flange Bath King pays attention to every nuanced production link, consistent with the outside and inside, meticulous, and regards quality as the life of the company; from the selection and testing of raw materials to the introduction of international production equipment-level assembly lines; from the ISO9001 international quality management system certification, The world's international management standard "5S management" is rooted in the enterprise; all strive to achieve excellence and outstanding presentation.
| Grass： The glass strictly adopts automobile-grade fully tempered safety glass that has passed the national 3C certification and the European BS6206 standard. It is insured by the insurance company. After being broken, the number of particles in the area of 5cmX5cm is between 60 and 80, which is higher than the national standard (the national standard is more than 40 particles) ). It is produced by the industry-leading float tempering process, and its tempering is high in flatness, the glass surface is smooth, and the degree of unevenness is only 1% of ordinary tempered glass, no dirt, easy to clean, and no fogging on the surface. |
| Refined copper parts： Using international standard brass, strong bearing capacity, all hand-made precision polishing, six-layer electroplating process, 24 precision processing; two-layer copper plating as the basis, two-layer nickel-plating, two-layer chrome plating to highlight the brightness, and pass the acid salt spray test 24-hour inspection (exceeding the national standard 8um), no black spots, blistering, delamination and other undesirable phenomena. |
| Stainless steel parts： Using 304 stainless steel, automatic multi-process polishing, mirror effect, corrosion resistance, fatigue resistance, and strong bearing capacity, it has passed the acid salt spray test for 24 hours and reached the standard of l0 or more. |
| Aluminum： The use of aviation-grade high-quality profiles, the aluminum strictly requires the use of high-quality aluminum with a hardness of about 13-14 degrees, with a purity of about 98%, and three metal elements of magnesium, silicon and copper, and the aluminum wall thickness is 1.2-3.0 mm, even up to 4-5mm in some places, moderately hard and tough but not brittle and not easy to deform. Its high tensile strength, yield strength, elongation, hardness and many other important indicators are better than national standards and European standards, which effectively guarantees the safety of use. |
| Pulley： Independent research and development design, the use of stainless steel bearings, the wheel seat is mainly made of Saigang nylon, stainless steel, stable performance, long service life, super corrosion resistance and bearing capacity, high-temperature high-quality nylon outer material. Original "V"-shaped design track, reasonable structure, good material, quiet, stable operation, high safety and long service life. |
| Adhesive strips： The ultra-permeable environmentally friendly rubber strip made of imported neutral PVC raw material special formula has good elasticity, can withstand high temperature of 65 degrees, low temperature of minus 20 degrees, corrosion resistance, and can maintain long-term color and no yellowing. |
| Bottom basin： It adopts imported acrylic board, artificial stone powder and imported resin, and is formed after high temperature treatment. It is firm and stable, strong in carrying capacity, good in safety, easy to clean, easy to install, and quick to install. |
微信公众号
Address: No. 58, Shunxing North Road, Yongxing Industrial Zone, Henglan Town, Zhongshan City, Guangdong Province
Tel: 0760-88661185, 0760-88661175
Fax: 0760-88661185
QQ: 929785770
E-mail: xgflyw@126.com
