How to install the glass shower room

2021-11-25 14:47:27
times

How to install the glass shower room


1. Prepare the necessary tools.


2. Install a bottom basin: the bottom basin part of the combined structure, the shower head manufacturer's adjustment and the height of the bottom basin, and make sure that there is no water at the bottom of the basin and the basin. Whether the hose can be found to expand and contract with social distance, firmly connect the bottom of the basin to the floor drain.


3. Test and protection: After the installation is completed, a water quality test must be carried out to ensure that the water quality is unblocked. Position and drill holes. Use a pencil and a spirit level to locate the hole on the aluminum plate against the wall. Then use a percussion drill to drill the hole.


4. Install the aluminum parts: knock the rubber particles into the holes, and then screw the aluminum bars to the wall.


5. Fix the glass: clamp and lock the glass in the hole of the bottom pot, and fix it with screws.


淋浴房源头厂家


6. Install the jacking pipe: You can find your corresponding position and drill a hole above the fixed glass through, install the (straight/inclined) fixing seat and connect the jacking pipe. Fix it on the top of the two glasses with an elbow sleeve.


7. Install the equipment rack: Install the equipment rack at the calibration position, tighten the rack nuts, fix the rack glass, and keep it vertical and horizontal. Pay attention to the aluminum waterproof material under the glass.


8. Install the trap door: Install the hardware of the trap door, and install the hinge on the reserved hole of the fixed door. After installation, adjust the position of the lotus leaf shaft until the door feels good.


9. Waterproof: Install the water-absorbing strip or waterproof strip on the side or underneath of a glass. Use silicone rubber?? to seal the connection between the aluminum material and the wall, the glass and the bottom basin.


10. Debugging and tightening: Check whether each part is comfortable and stable in use. If problems are found, they should be adjusted in time. After adjustment, tighten the corresponding screws to make the entire stainless steel shower room stronger.


11. Finish the job: Insert the decorative aluminum tape into the wall-mounted aluminum material to ensure its clean appearance. Then, wipe the entire stainless steel shower room with a cloth.


Tags

微信公众号

Contact us

Address: No. 58, Shunxing North Road, Yongxing Industrial Zone, Henglan Town, Zhongshan City, Guangdong Province

Tel: 0760-88661185, 0760-88661175

Fax: 0760-88661185

QQ: 929785770

E-mail: xgflyw@126.com

Back to top